Testimonials and Reviews of Hot Rod fuel hose

Reviews and Testimonials about Hot Rod fuel hose

See why Hot Rod fuel  hose PTFE hose and fittings are right for your LS swap, EFI conversion, transmission cooler lines and more AN hose uses. 

Based on 1580 reviews
Well-built gauge

Nice oil filled gauge. Works nice for my application.

AN-6 Nylon Braided Hose

Very happy with my purchase. Hose and fittings look awesome thank you Hot Rod

Great Product

As with all Hot Rod Fuel Hose fittings, the quality is 2nd to none. Customer service is also top notch. Thanks for everything!

Bundle kits

Let me just say the prices are great especially when they have sales!
Good quality product! But the best part is the customer service I’ve received. I received some items wrong and it was taken care of very quickly! Special thanks to Ainie Mellish who was speaking with me via email for taking care of things!

Super happy

Shipped immediately and very easy to assemble. Watch YouTube video and your ready. Highly recommend

LS Swap Kit for my G Body

The LS kit came with what I needed for my Malibu LS swap. Definitely get your YouTube education on tips and tricks when dealing with the cutting and installing fittings. Quick responses to emails from Hot Rod Fuel Hose before I ordered as well. One step closer to back in the road. Will be order again for my sons squarebody LS swap. Thanks

Looks good

Fittings are easy to make up and look nice, just make sure you have the vice jaws to hold them and the proper wrenches. Make sure you always leak check your fitting assembly prior to installation as I had one leak in the solder joint of the 90. Leak where black mark is. Wasn’t very happy with that.

Great Service

Yet to be installed but the kit looks the goods and the instructions are detailed. I am fairly confident it will fit and work as expected

Great product!

The hose is very high quality. Nice stuff!

Accurate and fast

Hey do you want to dress up your car or trucks piping braided hose AN or PTFE they have everything you need check them out! Not only fuel but for all liquids oils brake power steering this is the shop that has what you need.

Hot Rod Fuel Hose Always Delivers

I've been using this brand for 3 years. I've used all different brands from high dollar to cheap stuff.
Hot rod fuel hose always has the best quality for the best price.
I do ls swaps for a living and over hot rod fuel hose kits are in about 25 cars I've built. I trust the quality in very expensive cars and never have a doubt in my mind. When I need hoses and fittings. These guys always make sure I'm set up for success. If you are looking for quality materials and great customer service these are the people you want. I take pride in using their products in my everyday work. Thanks Again

Eh, could be better

They work as advertised. They make the cleanest cut possible for a generic cutter like this. However, I think the shears could be improved with a tighter cutting radius. If the cutting hook was smaller, I think it wouldn't crimp as much as it does. I used a 5.56 blue dummy round to round the crimped cut afterwards, and that practically addressed my issues with it. This was for 6AN line.

Better than typical AN connectors

The 3 piece that seals around the PTFE lines is clean. That makes this an order of magnitude easier to assemble than versions made for rubber hoses. Count your connections before buying! I had to order again because I forgot two or three connections.


I originally did my race setup without PTFE lines, and those rubber/stainless braided hoses stunk up the garage like nothing I've ever used. After replacing everything with the PTFE lines, the garage smells nice. Worth every dollar, and the headache-free smell of the garage makes it worth it too.

90° ptfe fittings

Great products..fittings are reusable easy to work with an great customer service

Looks great on our build!!

Great product, fast shipping, great customer service. We will be ordering a few more things soon.

Super fast shipping with great customer service!! I will be back!!

AN fittings

Made things easy while looking good at the same time.

85 C10 LS swap

Fittings worked mint. Get you a stock ‘87 TBI tank, whack off the barbs with a cutoff wheel, olives slide right on. Good seal, easy assembly, great looks.

GM OBS radiator fittings

I looked for information everywhere for the fitting size that fit the radiator transmission cooler lines for my 90 Chevy 1500 pickup. I finally got the correct information from Justin! Thanks buddy! The ½-20 inverted flare fit the radiator and I was able to make the transmission cooler lines that went from the radiator to the 700R4.


Excellently quality, Exactly what I needed to upgrade my fuel system, thank you!

Vice jaw review

I was glad I bought the vice jaws, without them assembly of the AN fittings on my hose would have been much more challenging. They did not marr the finish on the fittings and worked great.... almost. The magnets that hold them to the vice need to be stronger, I must have picked them up off the floor at least 20 times. I wouldn't try assembling hoses without them though!

PTFE hoses

I read this company has good quality hoses. Once I received them, I was impressed with the fit and finish of these. These seem 1000x better than traditional ss braided hoses. I also have earls on my car and these are just as good. Will buy again for sure.

AN Caps and Plugs
garry wilson
Plumb. Fuel cell

Quality product ,fast shipping,works as designed.